Module 25 Series

Premier Solution for Subsurface Stormwater Storage

Applications

Retention / Detention

StormTank Module systems are used to regulate the flow of stormwater. They are designed to restrict the discharge rate of stormwater runoff by providing large-volume storage and incorporating an impermeable liner to prevent infiltration.

StormTank stormwater Module retention and detention

Applications

Infiltration

In infiltration systems, the Module is used to temporarily store stormwater runoff until it is able to percolate into the surrounding soil and recharge the groundwater table.

StormTank stormwater module for application harvesting

Applications

Rainwater Harvesting

The modular basins use an impermeable liner to detain runoff and a pump to circulate grey water, reducing demand on the potable water supply and improving sustainability.

StormTank stormwater Module for infiltration

Applications

Flood Mitigation

The modular basins compensate for areas that lack or require additional capacity by providing the necessary stormwater runoff solutions to allow for utilization of previously inaccessible land.

StormTank stormwater module application for flood field

Features

High Void Space

With models providing as much as 97% void space, the Module offers the largest void space of any subsurface stormwater management system currently on the market.

Features

Open Design

The Module system does not include any internal walls or partitions, allowing for easy inspection and maintenance.

Features

Top & Bottom Panels

Durable polypropylene panels (platens) are engineered for stability and uniformly distribute load to the modular basin columns.

Features

Reinforced Columns

PVC columns are designed with reinforcing structural ribs. They are available in five different heights and enable system stackability.

Features

Side Panels

Durable polypropylene side panels are installed around the Module perimeter to prevent fill material from the entering the basin.

Project Gallery

Havana Square Apartment Complex

The StormTank team designed not one, but two, systems for the Havana Square Apartments. The Module’s flexibility enabled the team to work around a complex site layout, mitigating flooding and helping to revitalize a previously vacant area.

StormTank stormwater management at Havana Square

Project Gallery

Ephrata National Bank

By working with the contractor on the Ephrata National Bank project, StormTank converted a spec using two different storage products into a Module system, helping the customer to save time and money on the installation.

Project Gallery

Dickinson College

With space at a premium but a pressing need to expand, Dickinson turned to StormTank for a solution. A double-stack Module system was designed to not only fit within the college’s constraints but do so without impacting buildable land.

Project Gallery

Sheetz Gas Station

Sheetz purchased two small properties with a goal of redeveloping the sites to accommodate a gas station and convenience store. An innovative StormTank design helped them to maximize land availability and prevent sinkholes, which are common in the area.

Project Gallery

Gulf Breeze Medical Office Building

The Gulf Breeze project required a cost-effective stormwater management solution to offset the high cost of stone in the area. The Module’s small footprint and layout flexibility reduced project costs by reducing the amount of stone backfill needed for the installation.

Applications

Features

Project Gallery

Overview

Module 25 Series

stormwater module family The StormTank Module 25 Series is a subsurface stormwater storage unit commonly used for stormwater retention, detention, infiltration, and rainwater harvesting applications. It is load-rated for extreme applications, like heavy truck or under fire access roads, offering maximum strength while allowing for utilization of valuable land.

The Module 25 Series system can be flexibly designed to meet your specific site requirements and achieve compliance with strict runoff regulations. It is easily designed around existing structures and tight constraints, offered in a range of column heights to vary storage capacity and is stackable to reduce installation footprint.

NOT YOUR AVERAGE CRATE SYSTEM

Fully-factored HS-25 load rating
Extensively tested in a full-scale installation setting
Maximum 97% void space
Available in five heights, including 12-, 18-, 24-, 30-, and 36-inch
Nominal footprint: 18″ x 36″

Literature

Module 25 Series Cut Sheet

Module 25 Series Design Guide

Module Installation Guide

Debris Row Installation Guide

The Top 5 Raw Material Considerations For Choosing A Stormwater System

Understanding the HS-25 Classification

Designing an Underground Infiltration Basin

When to use the StormTank Module vs. the Pack

StormTank Water Quality Credit

What is a Detention Tank

Case Studies

Building the Foundation for a New Community

Bringing Medical Services to a Community

Cheers to Expansion

Case Studies

learn how Stormtank® brought results

Bringing Medical Services to a Community Read Article Cheers to Expansion! Read Article Kick Back & Relax Read Article

Installation

Storm Tank offers support during the design, review, and construction phases of the Module system. StormTank modules are delivered to the site as palletized components requiring simple assembly. No special equipment, tools, or bonding agents are required; only a rubber mallet.

We recommend that the installing contractor contact either StormTank or the local distributor prior to installation of the system to schedule a pre-construction meeting. This meeting will ensure that the installing contractor has a firm understanding of the installation instructions.

How to Assemble a StormTank Module

View Video Here

Warranty

Brentwood offers limited express product warranties. The StormTank product line is engineered to meet the most stringent industry performance standards and provide a flexible solution for varying project demands. Utilized for infiltration, detention, reuse, and pretreatment purposes, StormTank products offer a quality, cost-effective, and sustainable solution for stormwater management.

The StormTank Module carries a Limited Warranty, which can be accessed at www.brentwoodindustries.com/.

StormTank Module Limited Express Warranty

Download PDF

If you have any questions, please submit a general inquiry through our contact form.

Contact a Representative

RESOURCES

StormTank systems use a number of best-in-class resources to provide detailed CAD drawings and stormwater system modeling. CADdetails is a repository of many technical drawings, while HydroCAD, Bentley Systems, Clear Creek Solutions, and Hydrology Studio offer software solutions for modeling stormwater runoff and designing stormwater management systems using StormTank products. These resources allow you to design and analyze a system based on your project’s unique application requirements.